China Custom Automotive ABS PA6t PA9t PBT PA66 LCP Injection Molding Parts Plastic Moulding Parts injection mold for parts

Product Description

Custom Automotive ABS PA6T PA9T PBT PA66 LCP Injection Molding Parts Plastic Moulding Parts

We, HangZhou Forman Precision Industry Co., Ltd, provide one- stoped Custom Automotive Components solution. Mainly offer custom automotive connectors, precision plastic injection molding parts, Stamped Metal Parts etc. 

Product Description

Product Name  Custom Automotive ABS PA6T PA9T PBT PA66 LCP Injection Molding Parts Plastic Moulding Parts
Raw Material PA9T,PA6T,PA66,LCP,PBT   UL94V-0
Color Black,White,Green,Gray,Yellow, Blue, etc
Operating Temperature -40ºC to + 105ºC
Insulation Resistance 1000mΩ MIN
Package PE bag in Carton
Shipping By Express,By Air,By Sea,By Sea,By Truck,By Train etc
Free Sample  available 

Custom Plastic Injection Molding Parts is 1 of our main production line. We have supplied our plastic moulding parts to Audi, Ford, VW etc for years. 

If you have any demand for custom plastic parts, just send your drawing and detailed requirements to us , you will get the response ASAP. Just Try it.  Thank you in advance. 

Ahout Forman

Founded In 1999
No. of Employee  241 members
Occupied area 11000 Square Meter
R&D Team  14 staff with know-how and  more than 10 years experience in electronic and automotive industry
Main Business Electronic Connectors, OEM/ODM Automotive Connectors , including high precision metal stamping parts, plastic injection molding parts etc
Workshop   Four main workshop–Tooling machine workshop,Injection molding workshop, Metal stamping workshop and Auto Assembly Workshop
Machine List  Pls check the machine for each workshop as below:

Our Office:

Our Workshp:

Quality Assurance

In order to Control the product quality in the whole process, FPIC built itsself lab equiped with kinds of professional inspection and testing machine. In this lab, we could in Salt spray resistance test ,tensile test,intersection detection, coating thicknessinspection and so on. Before delivered, all the products should be detected by CCD 100%,to insure its high performance.

Certification & Honor

1999    Founded
2004    ISO9001:2008 Certified
2005    Became  USB Association Member
2006    First Full- Automatic Assembly Line
2013    ISO14001 Certified
2016    IATF 16949 Certified

Exhibition

Shipping

Regards to Shipping , it is up to you. By Express , By Air, By Sea, By Train, By Truck etc . 

FAQ

Q: Are you trading company or manufacturer?
 A: We are factory, so we can provide competitive price for you.
 
 Q: What kind of products can you provide?
 A: Our company (FPIC) can provide OEM/ODM spare parts. We are an experienced OEM / ODM business, focusing on tooling and mass production of Stamping parts, Injection-molded plastic parts and Insert-molding components .
 
 Q: What’s kinds of information you need for a quote?
 A: In order to quote for you earlier, please provide us the details together with your inquiry.
 1. 3D drawings (STEP, CAD, SOLID Works, PROE, DXF and PDF)
 2. Material requirement (include contact material and insulation material.)
 3. Surface treatment 
 4. Quantity  or Consumption (per order/ per month/ annual)
 5. Any special demands or requirements, such as packing, labels, delivery, etc.
 
 Q: What shall we do if we do not have drawings?
 A: Please send your sample to our factory, then we can copy or provide you better solutions. Please send us pictures or drafts with dimensions (Thickness, Length, Height, Width), CAD or 3D file will be made for you if placed order.
 
 Q: What makes you different from others?
 A.1. Our know-how R&D team with 14 member who all have rich professional knowledge and experience about connectors
    2. Automated production equipment and matched quality testing equipment. 

 Q: Is it possible to know how are my products going on without visiting your company?
 A: We will offer a detailed production schedule and send weekly reports with photos or videos which show the machining progress.
 
 Q: Can I have a trial order or samples only for several pieces?
 A: As the product is customized and need to be produced, we will charge sample cost, but if the sample is not more expensive, we
will refund the sample cost after you placed mass orders.

Thank you very much for your patience . Any demand , just send your drawing and detailed requirements for our further confirmation. 

Have a nice day!

US $0.01-1
/ Piece
|
100 Pieces

(Min. Order)

###

Plastic Type: Thermosetting Plastic
Plastic Form: Granule
Molding Method: Injection Molding
Raw Material: PA6t + 30% G.F
Color: Black
Operating Temperature: -40 to +105

###

Customization:

###

Product Name  Custom Automotive ABS PA6T PA9T PBT PA66 LCP Injection Molding Parts Plastic Moulding Parts
Raw Material PA9T,PA6T,PA66,LCP,PBT   UL94V-0
Color Black,White,Green,Gray,Yellow, Blue, etc
Operating Temperature -40ºC to + 105ºC
Insulation Resistance 1000mΩ MIN
Package PE bag in Carton
Shipping By Express,By Air,By Sea,By Sea,By Truck,By Train etc
Free Sample  available 

###

Founded In 1999
No. of Employee  241 members
Occupied area 11000 Square Meter
R&D Team  14 staff with know-how and  more than 10 years experience in electronic and automotive industry
Main Business Electronic Connectors, OEM/ODM Automotive Connectors , including high precision metal stamping parts, plastic injection molding parts etc
Workshop   Four main workshop–Tooling machine workshop,Injection molding workshop, Metal stamping workshop and Auto Assembly Workshop
Machine List  Pls check the machine for each workshop as below:
US $0.01-1
/ Piece
|
100 Pieces

(Min. Order)

###

Plastic Type: Thermosetting Plastic
Plastic Form: Granule
Molding Method: Injection Molding
Raw Material: PA6t + 30% G.F
Color: Black
Operating Temperature: -40 to +105

###

Customization:

###

Product Name  Custom Automotive ABS PA6T PA9T PBT PA66 LCP Injection Molding Parts Plastic Moulding Parts
Raw Material PA9T,PA6T,PA66,LCP,PBT   UL94V-0
Color Black,White,Green,Gray,Yellow, Blue, etc
Operating Temperature -40ºC to + 105ºC
Insulation Resistance 1000mΩ MIN
Package PE bag in Carton
Shipping By Express,By Air,By Sea,By Sea,By Truck,By Train etc
Free Sample  available 

###

Founded In 1999
No. of Employee  241 members
Occupied area 11000 Square Meter
R&D Team  14 staff with know-how and  more than 10 years experience in electronic and automotive industry
Main Business Electronic Connectors, OEM/ODM Automotive Connectors , including high precision metal stamping parts, plastic injection molding parts etc
Workshop   Four main workshop–Tooling machine workshop,Injection molding workshop, Metal stamping workshop and Auto Assembly Workshop
Machine List  Pls check the machine for each workshop as below:

What Is Injection Moulding?

Injection molding is a process of producing precision-molded parts by fusing raw plastics and guiding them into a mold. The main components of an injection mold are a hopper, barrel, and reciprocating screw. Before injection, the raw plastics are mixed with coloring pigments and reinforcing additives.

Characteristics of injection molded parts

Injection molded parttInjection molding is the process of manufacturing plastic parts. It uses thermoplastic, thermoset, or elastomers to manufacture components. The range of materials is enormous and includes tens of thousands of different polymers. They are blended with other materials and alloys to produce a wide range of properties. Designers select the appropriate materials for the job based on the properties and functions desired in the finished part. During the mold design process, mold materials must be carefully chosen, as different materials require different molding parameters.
Injection molding requires precise tolerances of the temperature and strain levels. The maximum strain level is about 0.15 percent. It is possible to adjust these parameters to meet the requirements of an injection molding project. The resulting products can be easily checked for quality by measuring the strain and temperature of the mold inserts in real time.
Injection molding is known for its laminar flow of the polymer. However, there is still a possibility for side-to-side thermal variations in the part forming cavity. This is illustrated in FIG. 4. The part has high and low sheared areas; the higher sheared areas flow on the bottom side of the part, while the lower sheared areas flow on the top side.
Injection molding is used to make many different types of plastic parts, from small parts to entire body panels of a car. These parts can be made from a variety of different materials, such as polypropylene for toys and ABS for consumer electronics. They can also be made from metal, such as aluminum or steel.
The melting temperature of plastic parts must be appropriate for the project’s specifications. The mold should be large enough to produce the parts desired. This will minimize the impact of uneven shrinkage on the product’s dimensional accuracy. In addition to the temperature, a mold must be designed with the material’s properties in mind.

Tooling fabrication

Injection molded parttInjection molded parts are produced using molds. This process is a complex process that requires customization to ensure proper fit and function. The main component of a mold is the base, which holds the cavities, ejectors and cooling lines. The size and position of these components are crucial to the production of quality parts. Incorrectly sized vents can cause trapped air to enter the part during the molding process. This can lead to gas bubbles, burn marks, and poor part quality.
The material used for tooling fabrication is usually H-13 tool steel. This steel is suitable for injection molded parts as it has a low elongation value. The material used to fabricate tooling for injection molded parts typically has a high yield strength. The material used for injection moulding tooling is typically 420 stainless steel or H-13 tool steel. These materials are suitable for most injection molding processes and have comparable yield strength compared to wrought or MIM parts.
Another important part of tooling fabrication is the design of the mold. It is important to design the mold with a draft angle, as this will make ejection easier and reduce costs. A draft angle of 5o is recommended when designing a tall feature. Choosing a draft angle is essential to ensuring that the plastic part is free from air bubbles after injection molding.
Injection moulding tooling costs can account for as much as 15% of the cost of an injection moulded part. With innovation in mould materials and design, tooling fabrication can be more efficient and cost-effective.

Surface finishes on injection molded parts

Injection molded parttSurface finishes on injection molded parts can have a variety of effects on the part’s appearance and performance. Different materials lend themselves to different kinds of surface finishes, with some plastics better suited for smooth, glossy finishes than others. The type of surface finish is also affected by several factors, including the speed of injection and the melt temperature. Faster injection speeds help improve the quality of plastic finishes by decreasing the visibility of weld lines and improving the overall appearance of the parts.
For a smooth plastic surface finish, some companies require a high level of roughness on the part. Others may prefer a more rough look, but both options can have their benefits. The type of surface finish chosen will depend on the part’s purpose and intended application. For example, a glossy plastic finish may be preferred for a cosmetic part, while a rougher finish may be better suited for a mechanical part that must be tough and cost-effective.
Surface finishes on injection molded parts are often customized to match the application. For example, some parts require a rough surface finish because they require a greater amount of friction. These parts may require a sandblasting process to achieve the desired texture. Other processes can also be used to control plastic texture.
The type of surface finish depends on the materials used, as well as the design and shape of the part. The type of material used, additives, and temperature also have an impact on the surface finish. It is also important to consider surface finishes early in the design process.

Importance of a secondary operation to improve accuracy

While most injection molded parts do not require secondary operations, some components do require this type of processing. The surface finish of a component will determine how well it functions and what other secondary operations are necessary. Depending on the part’s function, a smooth or textured surface may be appropriate. Additionally, some parts may require surface preparation before applying adhesives, so an accurate surface finish can make all the difference. In order to achieve the desired finish, the injection molder should have experience molding different materials. He or she should also have the knowledge of how to simulate the flow of a mold. Also, experienced molders know how to mix materials to achieve the desired color, avoiding the need for secondary painting processes.
Injection molding is a complex process that requires precision and accuracy. The optimal temperature of the melted plastic must be chosen, as well as the mold itself. The mold must also be designed for the correct flow of plastic. In addition, it must be made of the best thermoplastic material for the part’s design. Finally, the correct time must be allowed for the part to be solid before it is ejected. Many of these issues can be overcome with specialized tooling that is customized to the part’s design.
Injection molding offers the opportunity to make complex parts at low cost. It also allows manufacturers to make parts with complicated geometries and multiple functions.
China Custom Automotive ABS PA6t PA9t PBT PA66 LCP Injection Molding Parts Plastic Moulding Parts     injection mold for partsChina Custom Automotive ABS PA6t PA9t PBT PA66 LCP Injection Molding Parts Plastic Moulding Parts     injection mold for parts
editor by czh 2022-12-06